Set Function; Memory Function - ratiotec CS 250 Bedienungsanleitung

SET Function

By using the SET function, it is possible to count a preset number of coins from a bigger amount of coins, for in-
stance to prepare coin rolls. Press SET to open the overview. The denominations will be displayed, identified by
the numbers 1–8, with the amount of coins of the batch next to it. Select a coin cup (denomination) by pressing 1
to 8 and then set the desired batch amount from 0 to 999 by using the number keys 0 to 9. Press SAVE to confirm
your settings and C Key to close the program. When the batch amount is reached during the counting process, the
machine will automatically stop. Remove the coins from the correspondent coin cup and continue the counting
process with START | STOP.

Memory Function

It is possible to memorise the current counting result in case the counting process needs to be stopped or paused.
Before resuming the counting process, the memorised counting result can be reloaded and used as start point to
proceed the counting.
Operation to save: Press SAVE key and one of the buttons "1","2","3" or "4", to save a counting result in
one of the four memory locations.
Operation to reload: Press the SAVE key and one of the buttons "5","6","7" or "8", to reload a counting
result from one of the four memory locations.
Print counting results
By pressing the PRINT key an overview of the counting results will be printed through the printer connected. The
receipt shows the quantity and value for each denomination, the total quantity and total value.
Cleaning
The coinsorter CS 250 is a reliable coin counting and sorting machine. However, errors may occur while using the
device. For a trouble-free operation, we recommend an annual maintenance of the product via the ratiotec service
and regular cleaning of the machine using compressed air (optionally available). The inside of the machine should
be cleaned too. To do so, switch off the machine and open the coin feeder by pressing the button under the ratiotec
logo at the front of the machine. Furthermore, dust depositions caused by the processing of coins can be removed
from the optical sensors using a lightly moist microfiber cloth.
[ EN]
9