About Guard Tours; Advanced - Axis Q3505-SVE Wartung Und Service

AXIS Q3505-SVE Mk II Fixed Dome Network Camera
PTZ (Pan Tilt Zoom)
It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events
and set up an action rule with PTZ Preset Reached as trigger.
Note
This is feature is not available if you have selected optical zoom for installation (see PTZ Mode on page 10).

About guard tours

A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random, and for
configurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser.
Note
For products that support limited guard tours, there is a fixed minimum view time of 10 seconds.
How to create a guard tour
1. Go to Setup > PTZ > Guard Tour.
2. Click Add.
3. Type a name.
4. Specify the pause length between runs.
5. Select a preset position from the drop-down list and click Add.
6. For each preset position, enter the View Time in seconds or minutes.
7. Specify the View Order of the preset positions, or select Random view order.
8. Click Save.
How to edit a guard tour
1. Go to Setup > PTZ > Guard Tour.
2. Select the guard tour in the Guard Tour List.
3. Click Modify.
How to delete a guard tour
1. Go to Setup > PTZ > Guard Tour.
2. Select the guard tour in the Guard Tour List.
3. Click Remove.

Advanced

Controls
Advanced PTZ settings can be configured under PTZ > Advanced > Controls.
The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page's Ctrl
panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.
Click Add to add a new shortcut command button.
The following PTZ controls are enabled by default:
34