How To Include An Overlay Image; About Privacy Masks; Set Focus And Zoom - Axis Q3505-SVE Wartung Und Service

AXIS Q3505-SVE Mk II Fixed Dome Network Camera
Video and Audio
5. Click Save.

How to include an overlay image

1. Go to Video & Audio > Overlay Image.
2. Select the image to use from the Use overlay image list and click Save.
3. Go to Video & Audio > Video Stream and select the Image tab.
4. Under Overlay Settings, select Include overlay image at the coordinates.
5. To control the image's position, enter the X (horizontal) and Y (vertical) coordinates. The X=0 and Y=0 position is
the top left corner. If a part of the image is positioned outside the video image, the overlay image will be moved so
that the whole image is visible.
6. Click Save.

About privacy masks

A privacy mask is a user-defined area that covers parts of the monitored area. Privacy masks appear as blocks of solid color or
blurred image elements and are applied on the video stream. Privacy masks cannot be bypassed using the VAPIX® application
programming interface (API).
The Privacy Mask List (Video & Audio > Privacy Mask) shows all the masks that are currently configured in the Axis product and
indicates if they are enabled.
You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name.
For more information, see the online help
Important
Adding many privacy masks may affect the product's performance.

Set focus and zoom

These instructions are valid if you have selected Optical zoom for installation during camera startup.
1. Install the camera as described in the Installation Guide.
2. Go to Setup > Video & Audio.
3. On the focus page go to the Basic tab.
4. Set the zoom level using the slider.
Note
Movements in front of the camera should be avoided when performing autofocus.
5. Click Perform autofocus.
6. If the result is not satisfactory, go to the Advanced tab.
On the Advanced tab, focus can be adjusted manually:
1. Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the best
conditions for focusing.
2. Focus is set in the Focus window. Use the mouse to move and resize the focus window.
3. Click in the Focus position bar to focus on a desired location.
27