Ptz (Pan Tilt Zoom); About Preset Positions; Gatekeeper - Axis Q3505-SVE Wartung Und Service

AXIS Q3505-SVE Mk II Fixed Dome Network Camera

PTZ (Pan Tilt Zoom)

PTZ (Pan Tilt Zoom)
PTZ (pan, tilt and zoom) is available if you have enabled digital PTZ in the selected view area. For more information on view areas,
see View Area on page 24.
PTZ is available if you have selected Optical zoom for installation as PTZ mode. If Optical zoom for monitoring has been selected as
PTZ mode, view areas are disabled. For more information, see PTZ Mode on page 10.

About preset positions

A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists of
the following values:
• Pan and tilt positions
• Zoom position
Each view area has its own preset positions.
How to access the preset positions
Preset positions can be accessed in several ways:
• By selecting the preset from the Source drop-down list in the Live View Page.
• When setting up action rules. See page 45.
• When setting up guard tours. See page 34.
• When setting up the Gatekeeper. See page 33.
How to add a preset position
1. Go to Setup > PTZ > Preset Positions.
2. Click in the image or use the controls to steer the camera view to the desired position.
3. Write a name in the Current position field.
4. Click Add to save the preset position.
Set the Home Position
The entire view area is treated as the Home position which is readily accessible by clicking the Home button on the Live View
page and in the Preset Positions setup window.
The product can be configured to return to the Home position when the PTZ functionality has been inactive for a specified length of
time. Enter the length of time in the Return to home after field and click Save. Set the time to zero to prevent the product from
automatically returning to the Home position.

Gatekeeper

The Gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area, the Gatekeeper will steer
the camera to a selected preset position. Using a zoomed-in preset position can make it possible to, for example, read a license plate
or identify a person. When motion is no longer detected, the camera returns to its Home position after a defined time.
To enable the Gatekeeper, go to PTZ > Gatekeeper and follow the online instructions.
33