Number Plate Light - Malaguti CENTRO 125IE Bedienungsanleitung

5.14.4 NUMBER PLATE LIGHT


• Number plate light (C‑Fig.41)
Bulb 12V - 5W (W5W)
2
To check if the number plate light (C‑Fig.41) is working
properly, flick the light switch, which is on the right-hand
3
side control, to its central position and turn the key to
starting position.
4
5
6 C
ENG
Fig.41
40
REPLACING THE BULBS
To replace the number plate light:
• Remove the number plate light cover (F‑Fig.42), by
loosening the screw (V‑Fig.42).
• Remove the rubber lamp socket and plastic cover.
• Replace the light bulb.
• Refit the lamp socket and cove
When performing the operations described
above, pay attention not to damage parts nearby
(transmission, wiring, gaskets, etc.)
F
V
Fig.42