Key Switch; Handlebar Lock - Malaguti SpiderMax GT500 Benutzer- Und Wartungshandbuch

3.14 KEY SWITCH

• This switch (Fig. 21) controls the ignition circuit the handlebar
lock, the seat opening mechanism / the helmet compartment
and glove compartment.
a) ignition disabled (the key can be removed).
b) 'ready to start' position (the key cannot be removed).
c) handlebar lock activated (ignition is disabled. The
key can be removed) (§3.15)
d) helmet compartment opening position (§3.7)
EN
e) glove compartment opening position (§3.9)
NOTE: the vehicle is supplied with two keys
If you lose one of the keys, ask an Authorised MALAGUTI
Service Centre for a replacement (spare key). If you lose
both keys, you will have to replace the entire key block
22
and 'Immobilizer' system.

3.15 HANDLEBAR LOCK

Locking
turn the handlebar all the way to the right or left, push the key in
and turn it counter-clockwise (fig. 22).
Disengaging
Turn the key clockwise.
c
e
a
b
d
Fig. 21 Fig. 22