Maintenance - MediaShop Twist & Shape Gebrauchsanleitung

APPLICATION
Always remove the ball-head before exercises. In order to avoid an injury or jamming
when moving the appliance, secure the base plate by insertion of the ball-head,
whereby the foot plate is aligned straight ahead. (See illustration 9)
The hand-grip height is adjustable to 5 levels from a minimum of 106 cm to a maximum
of 120 cm.
Display screen functions:
Press the "MODE" button to activate the display screen and select the desired function.
➔ SCAN: Duration, repetition count; repetition count per minute and calorie consumption
will be displayed
➔ TIME: Exercise duration
➔ COUNT: Counts the duration of all exercise workouts together
➔ REPS: Average number of movements per minute during an exercise
➔ CAL: Automatically stored count of continuous calorie consumption during exercise
The above stated functions represent the accumulated data from the previous time of
use. To reset the display screen, keep the "MODE" button pressed for two seconds. If
unrecognisable symbols appeal on the display screen, the battery needs to be replaced.
The display screen will switch off automatically after four minutes if there is no signal input.

MAINTENANCE

If the product is to be used, following a period of time of being stored unused, ensure that
the product is in order and can be safely utilized. To clean the appliance, use a dry cloth.
DISPOSAL
Do not dispose of the product at the end of its serviceable life with the normal household
refuse. Take it to a recycling collection point for electrical and electronic appliances.
Find out about collection points that are operated by your retailer or local authority. The
reutilisation and recycling of old appliances is an important contribution to the protection
of our environment.
18