ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Speed change lever
7-1. Action mode change lever
8-1. Adjusting ring
8-2. Graduations
SPECIFICATIONS
Capacities
-1
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model BDF441
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
8-3. Arrow
9-1. Steel band
9-2. Grip base
9-3. Side grip
9-4. Protrusion
9-5. Groove
10-1. Sleeve
11-1. Bit holder
11-2. Bit
12-1. Screw
12-2. Hook
Model
Steel
Wood
Wood screw
Machine screw
High (3)
)
Medium (2)
Low (1)
Overall length
Net weight
Rated voltage
) : 70 dB(A) or less
pA
2
) : 2.5 m/s
or less
h,D
2
BDF441
13 mm
50 mm
6 mm x 75 mm
2.3 kg
D.C. 14.4 V
ENE034-1
For Model BDF451
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
ENG103-4
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
ENG202-3
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
4
12-3. Groove
14-1. Limit mark
15-1. Rear cover
15-2. Screws
16-1. Arm
16-2. Spring
16-3. Recessed part
17-1. Carbon brush cap
18-1. Hole
18-2. Carbon brush cap
BDF451
13 mm
65 mm
10 mm x 89 mm
6 mm
0 - 1,700
0 - 600
0 - 300
238 mm
2.4 kg
D.C. 18 V
) : 72 dB(A)
pA
Wear ear protection.
2
) : 2.5 m/s
h,D
2
ENG104-2
ENG202-3
or less
ENG901-1