Getting Started And Operation - auna Columbia Bedienungsanleitung

EN
22

GETTING STARTED AND OPERATION

REMOTE BATTERY INSTALLATION
The infrared remote control requires 2 PCS UM-4 R03, AAA (3V) Battery.
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
For your own safety read the following instructions carefully before
attempting to connect this unit to the mains.
Press the POWER SWITCH to ON position (15) then press the standby knob.
The unit is power on.
MAINS (AC) OPERATION
This unit is designed to operate on AC 100 V - 250 V 50 Hz/60 Hz .current
only. Connecting it to other power sources may damage the unit.
Caution: to prevent electric shock disconnect from the mains before
removing cover. No user serviceable parts inside. Refer servicing to
qualified service personnel. Remove the stereo carefully from the box,
retaining the packaging for future use.
SETTING THE DISPLAY MENU LANGUAGE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15).press standby button The
Display (1) will light up.
2. Press the MENU BUTTON (4) then press skip+ and skip- KNOB the until
select "SYSTEM".
3. Press skip+ and skip- KONB the until select LANGUAGE, then press the
enter to confirm.
SETTING THE DISPLAY TIME AND DATE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15).press standby button(2)
The Display (1) will light up.
2. Press the MENU BUTTON (4) then press skip+ and skip- KNOB the until
select "SYSTEM".
3. Press hold stop key(10) until select TIME, then press the stop KNOB to
confirm.
4. Press hold stop key(10) until select TIME )and select SET 12/24 HOURS.
Press skip+ and skip- KNOB and press stop KNOB to confirm.
5. Repeat the above operation 2-4 and select one of the following options:
SET TIME/DATE or AUTO UPDATE.
6. If selected SET TIME/DATE, use the skip+ and skip- KNOB to set Hour &