3.10.15 Remote Control Of The Function Generator - Elektro-Automatik EL 9080-170 B Betriebsanleitung

3.10.15 Remote control of the function generator

The function generator can be remotely controlled, but configuration and control of the functions with individual
commands is different from manual operation. The external documentation "Programming Guide ModBus & SCPI"
explains the approach. In general the following apply:
• The function generator is not controllable via the analog interface
• The function generator is unavailable if R mode (resistance) is activated
• Some functions are based on the arbitrary generator and some on the XY generator, thus both have to be con-
figured and used separately
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
EL 9000 B Series
www.elektroautomatik.de
ea1974@elektroautomatik.de
Page 82