Control Elements - Elektro-Automatik EL 9080-170 B Betriebsanleitung

1.8.6

Control elements

Figure 11 - Control Panel
Overview of the elements on the control panel
For a detailed description see section „1.9.6. The control panel (HMI)".
Touchscreen display
(1)
Used for selection of set values and menus , as well as display of actual values and status.
The touchscreen can be operated with the fingers or with a stylus.
Rotary knob with push button function
Left knob (turn): adjusting the voltage, power or resistance set values, or setting the parameter values in
the menu.
(2)
Left knob (push): selection of the decimal position to be changed (cursor) in the current value selection.
Right knob (turn): adjusting the current set value, or setting parameter values in the menu.
Right knob (push): selection of the decimal position to be changed (cursor) in the current value selection.
On/Off Button for DC input
(3)
Used to toggle the DC input between on and off, also used to start a function run. The LEDs "On" and "Off"
indicate the state of the DC input, no matter if the device is manually controlled or remotely
USB-A port
(4)
For the connection of standard USB sticks. See section „1.9.6.5. USB port (front side)" for more details.
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
EL 9000 B Series
www.elektroautomatik.de
ea1974@elektroautomatik.de
Page 24