Scope Of Delivery; Accessories; Options - Elektro-Automatik EL 9080-170 B Betriebsanleitung

1.9.3

Scope of delivery

1 x Electronic load device
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m (5.9 ft) USB cable
1 x Set of DC terminal cover(s)
1 x USB stick with documentation and software
1 x Mains cord
1 x UK wall socket adapter (only included in delivery to the UK)
1.9.4

Accessories

For these devices the following accessories are available:
Digital interface modules
IF-AB
1.9.5

Options

These options are not retrofittable as they are permanently built in or preconfigured during the manufacturing process.
POWER RACKS
19"-rack
3W
GPIB interface
EL 9000 B SLAVE
Additional slave units
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Pluggable and retrofittable digital interface modules for RS232, CANopen, Ethernet,
Profibus, ProfiNet, ModBus TCP, CAN or EtherCAT are available.
Details about the interface modules and the programming of the device can be found
in separate documentation that is available on an USB stick, which is included with
the device, or as PDF download on the Elektro-Automatik website.
19" cabinets in various configurations up to 42U as parallel systems are available,
even mixed with power supply devices to create test systems. Further information
in our catalogue or upon request.
Replaces the standard slot for pluggable interface modules by a rigidly installed
GPIB port. This option can be retrofitted upon request. The device will keep the
USB and analog interfaces. Via the GPIB port, it can only support SCPI commands.
These slave units are intended to extend the power of specific standard models of
this series. They don't feature an HMI and are intended to only run being controlled
by the master.
The slave units can be ordered by their article number and retrofitted on location.
A patch cable for master-slave bus connection of the additional slave is included.
Following slave models are available:
Model
EL 9080-510 B Slave
EL 9200-210 B Slave
EL 9360-120 B Slave
EL 9500-90 B Slave
EL 9750-60 B Slave
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
Article number Can be used to extend
33290270 EL 9080-510 B
33290271 EL 9200-210 B
33290272 EL 9360-120 B
33290273 EL 9500-90 B
33290274 EL 9750-60 B
www.elektroautomatik.de
ea1974@elektroautomatik.de
EL 9000 B Series
Page 26