Bike Select; Wi-Fi Settings - Pioneer SGX-CA500 Bedienungsanleitung

Cyclocomputer Settings
EN

Bike Select

Use the setting below to change the bike being used.
Setting Item
(Bike name)
• If the bike is changed, the registered sensor setting will also change automatically. When you change the bike, make sure that the
sensor is connected with the device.

Wi-Fi Settings

Configure Wi-Fi settings, such as switching the Wi-Fi
connection and adding an access point.
1
On the home screen, tap the [Settings] icon.
This displays the settings menu.
2
Tap [Wi-Fi Settings].
3
Tap the [Wi-Fi] check box.
The Wi-Fi function is turned on and scanning for an
access point starts.
A list appears when access points are found.
44
Change the bike being used. The device can have up to six bikes registered to it.
Description
• Tap [Scan] to reload the list.
• The device is compatible with the WEP and WPA/WPA2
PSK standards.
• The device is not compatible with the LAN stealth functions
of routers and access points. Routers and access points in
stealth mode do not appear on the device's connection list.
• The device cannot connect to access points that require you
to enter account information in an internet browser.
4
Tap the access point you want to add.
This displays network information. Input the password
and other required information, and then tap [Connect] to
start connecting.