Pairing Sensors - Pioneer SGX-CA500 Bedienungsanleitung

Pairing Sensors

Pair the SGY-PM910H/PM900H Pedaling Monitor Sensor or
other ANT+ sensors to the device.
Before connecting the sensors
• Make sure that the sensors that you want to pair are
activated.
• If more than one sensor is activated, bring the device close
to the sensor or specify the device number to pair.
• If you use the speed sensor sold separately and the wheel
circumference is different, set the wheel circumference.
The wheel circumference is set to 2096 mm by default. For
details, refer to "Bike Edit" in "Cyclocomputer Settings" (Ü
page 49).
1
Mount the sensors on your bike.
For details about how to mount sensors, refer to the
user's manual of your sensors.
2
On the home screen, tap the [Sensors] icon.
3
Tap [Connect New].
This displays the sensor settings menu.
4
Tap [Device Type] and then select the type of
sensor(s) you wish to pair.
Types of compatible sensors:
• SpeedSensor
• CadenceSensor
• Speed & Cadence Sensor
• Heart Rate Monitor
• PowerMeter
• Pedaling Monitor L
• Pedaling Monitor R
• If multiple sensors are activated, specify the device number.
Ü Specifying the device number (page 14)
EN
13