Restore - Pioneer SGX-CA500 Bedienungsanleitung

Restore

Backup data is used to restore the system after initializing it
following a system error, etc.
• If a logging operation is in progress on the device, stop
logging and save the log data before performing the restore.
• For information about what data is restored, refer to
"Initialized, Backed Up, and Restored Data" under "Initialize"
(Ü page 53).
1
Connect the device to your PC.
Connect the provided USB cable to a computer's USB
connector.
For information about connections, refer to "Charging the
Device" under "Charging" (Ü page 6).
2
Copy the backup data to the device.
Copy the backup data from your PC to the folder in the
device built-in flash memory named "\Pioneer\Setting\".
3
Unplug the USB cable from the device's USB
connector.
4
On the home screen, tap the [Settings] icon.
This displays the settings menu.
5
Tap [System] - [Setting Manager] - [Restore].
This will display a confirmation message asking if you
want to restore system data.
6
Tap [OK].
This starts system data restore.
The message will appear when restoring is complete and
the device restarts automatically.
EN
55