Pioneer SGX-CA500 Bedienungsanleitung Seite 25

4
Configure the detailed trigger settings.
The setting items below can be specified according to the selected trigger.
Trigger
Location Lap Location
Start Location
User Registration
Location
Trigger Area Size
User Location
Registration
Distance Lap Distance
Time Lap Interval
• You can register up to 10 auto lap locations by using the [START/STOP] or [LAP] button.
• You can register only 1 location by using the [User Location Registration].
• The auto lap locations will be cleared when the timer is reset.
• You can record a lap manually by pressing the [LAP] button even while the Auto Lap function is set to on. If [Lap Location] is set as an
auto lap trigger, an auto lap location is registered as well as a lap being recorded.
• If GPS is not being received, the registration of auto lap locations by using the [START/STOP] or [LAP] button, or user locations by using
the [User Location Registration] are not available.
Setting Item
Registers a point as an auto lap location where the [LAP] button is pressed while
logging is in progress, and from the next time when passing nearby the auto lap
location, records a lap automatically.
Registers a point as an auto lap location where logging starts, and from the next time
when passing nearby the auto lap location, records a lap automatically.
Records a lap at the auto lap location registered with the [User Location Registration]
button.
Specify the distance from the auto lap location in which the system records a lap.
For example, set [50 m] to record a lap when approaching to within a 50 m radius of the
location.
Press to register an actual point as an auto lap location.
Records a lap when a preset lap distance is attained.
Records a lap when a preset lap time is attained.
Description
Auto Lap Settings
EN
25