Connecting The Console To The Pro3 Kvm Switch - Belkin OmniView PRO3 Benutzerhandbuch

Installation

Connecting the Console to the PRO3 KVM Switch

You must use the same type of platform for both the keyboard and mouse. For
example, if you are using a USB Keyboard, you must also connect a USB mouse
to the console.
Step 1
Connect the VGA monitor cable to the HDDB15 female port on the back of the
PRO3 KVM Switch in the "Console" section. (Refer to diagram below.)
Step 2
Connect the PS/2 or USB keyboard cable to the keyboard port on the back of
the PRO3 KVM Switch in the "Console" section. (Refer to diagram below.)
14