Status Menu; Set User; Set Clock - Extraflame Lucrezia Lp20 Benutzerhandbuch

19.6.

StatuS menu

the status menu is used to display the status of the inputs and outputs in the board
from the main screen, turn p2 to select the
™
press p2 to confirm (display of StatuS 1 screen)
™
press p2 again to display StatuS 2 screen
™
to go back, press p3
™
to exit, press key p1
™
StatuS 1 lp30
motor...
out 2...
pel motor...
ign-plug...
p1
19.7.

Set uSeR

the set user menu offers the following possibilities:
set clock: allows regulation of the time and date
™
set chrono: allows to program 4 functioning time periods for the boiler, with automatic switch-ons and switch-offs and setting of
™
the desired water temperature for every time period.
language: setting the desired language (italian, english, french, german, Spanish)
™
™ set heat exchanger: programming of the start and end times of the automatic cleaning of the heat exchangers.
19.7.1.

Set clock

from the main screen, turn p2 to select the
™
™ press p2 to confirm
Set clock
turn p2 to select "
™
confirm, pressing p2
™
turn p2 to select the desired parameter
™
press p2 to enter modification mode
™
turn p2 to modify the value
™
press p2 to confirm and exit
™
if you wish to exit without memorising, press key p1
™
70
icon
p2
"
p3 p1
icon
StatuS 2 lp30
revS
t fumeS
t h2o..
p2
lp30 menu Structure
p3