Inhaltsverzeichnis
Werbung
1.
Unique identification code of the product-type: Noviso V1
2
Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4): see CE mark
Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: Manually or power
3.
operated door to ensure safe access for goods and vehicles in industrial, commercial or residential areas, accompanied or operated in areas with human traffic.
4.
Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11(5):
5.
-
System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 3
6.
7.
In case of the declaration of performance concerning a construction product covered by a harmonised standard:
The Notified Body, NB No.: 0679 CSTB, 77 447, Marne la Vallée, conducted product testing based on type approval and issued: Test reports detailing the performance
characteristics of the product. The company's in-house production control complies with the requirements of EN ISO9001:2008.
8.
-
9.
Declared performance:
Key characteristics
Waterproofness
Release of hazardous substances
Resistance to wind loads
Thermal resistance
Air permeability
Safe opening (doors that move vertically)
Specification of the geometry of glass components
Mechanical strength and stability
Operating forces (power operated doors)
Permanency of waterproofness, thermal resistance and air permeability
10.
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9 and, when combined with the prescribed Novomatic 200, 413,
553S or Integraport, complies with the pertinent provisions of
the EC Machinery Directive (Directive 2006/42/EC) / harmonized technical specification: EN 12453:2000
o
the EC Low Voltage Directive (Directive 2006/95/EC) / harmonized technical specification: EN 60335-1:2010, EN 60335-2-95:2004
o
the EMC Directive (Directive 2004/108/EC) / harmonized technical specification: EN 61000-6-2:2005, EN 61000-6-3:2007
o
This conformity has been confirmed by the Notified Body indicated in number 7.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Frank Wiedenmaier, Member of the Management Board / COO
Rees, 07.03.2013
......................................................................................................................................................
We hereby confirm compliance with the manufacturer's specifications.
Place, Date:
FT_BAV_PROD_114_Notice_de_pose_NOVISO_1.0
DECLARATION OF PERFORMANCE No. 0212-CPR-2013
Novoferm France
ZI, Les Redoux
F - 44270 Machecoul
Tél. : +33 2 40786900 / Fax : +33 2 40314304
Email :
contact@novoferm.fr
Signature:
Name and address of installation firm
Performance
Harmonized technical specification
see CE mark
NPD
see CE mark
see CE mark
see CE mark
EN 13241-1:2003+A1:2011
confirmed
confirmed
confirmed
confirmed
see CE mark
______________________
Frank Wiedenmaier, COO Novoferm GmbH
Signature:
Werbung
Inhaltsverzeichnis
