Audio Setting; Dab/Dab+ Radio - auna RCD-70 DAB Bedienungsanleitung

EN
30
USING THE FM MENU
• Press and hold the Menu button (3).
• Press the Skip(+/-) button (8/7) or rotate the Scroll(+/-) knob (11) to
choose different modes.
• Press the Enter button (11) to confirm the Scan setting.
Scan Settting
• Press the Skip(+/-) button (8/7) or rotate the Scroll(+/-) knob (11) to
choose.
• Press the Enter button (11) to confirm the selection below:
(The asterisk behind the option indicates the current setting.):
Strong station only
All Stations: Regardless of the signal strength

Audio Setting

• Press the Skip(+/-) button (8/7) or rotate the Scroll(+/-) knob (11) to
choose.
• Press the Enter button (11) to confirm the selection below:
(The asterisk behind the option indicates the current setting.)
Forced mono
Stereo allowed
System
• The available System settings are as descriped in the below section
"Using the DAB Menu".

DAB/DAB+ RADIO

1 Press the Source button (6) to select the DAB mode.
2 Press the Scan button to do auto full scan and some stations are
automatically stored with suitable signal strength. After the search is
complete, the first stored station is broadcast automatically.
• If the signal is weak or distortion in DAB mode, try to align the
telescopic antenna vertically
Displaying DAB Information
• Press the Info button (3) to get the following information (if available):