auna RCD-70 DAB Bedienungsanleitung Seite 35

Problem
The device cannot be
operated.
CD playback is not
available.
There is no audio
signal during BT
connection.
The device cannot be
connected.
Possible Cause
The device crashes and
"hangs".
The audio cable is
connected to the AUX
IN socket.
The device is not
registered with the
audio source.
The Volume is set too
low.
The registration does
not work.
The Audio source is
shut off.
BT is shut off on the
audio source.
The BT version is not
supported.
Possible Solution
Disconnect the power
supply for 5 sec. Then
switch the device on
again.
Disconnect the cable
from the AUX IN
socket.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
Check to see if the
audio source supports
the A2DP protocol.
Turn on the audio
source.
Turn on the BT
function on the audio
source.
Use a different audio
player.
EN
35