Festina IFMCS00 Betriebsanleitung Seite 75

CARE FOR LONG TERM USE
[Safekeeping]
If you do not use the watch for an extended period of time, wipe off perspiration, dirt
and moisture thoroughly and keep it in a place not exposed to extremely high or low
temperatures or high humidity. Don't leave a dead battery in the watch for a long time
and be sure to replace it with a new one. If battery fluid leaks out, it may damage
movement components.
[Keep Your Watch Clean]
Wipe off dirt and moisture from the glass with a soft, absorbent cloth. If you wear the
watch when the back side of the case and watchband is soiled they may cause a skin
rash as they come in direct contact with your skin. Keep your watch clean also to
avoid staining your cuffs.
How to clean the watchband:
• Metal band wash soiled parts with a tooth brush in mild, soapy water.
• Rubber band wash in water.
Do not use solvent.
I F M C S 0 0
146
I F M C S 0 0
SPECIFICATION
1. Caliber number
CSOO (Depth indication measured in meters/Temperature in Centigrade)
2. Accurary of time measurement
± 20 seconds/month (at normal temperature
5ºC - 35ºC / 41ºF - 95ºF
3. Accuracy of depth reading
± (indicated value X 3%+30cm)
Conditions: constant temperature and excluding margin of error by sight
* Assured accuracy temperature range 10ºC-40ºC / 50ºF-104ºF
Accuracy of depth reading is dependent on surrounding temperatures.
4. Accuracy of temperature reading:
-5ºC/23ºF – +14ºC/57,2ºF = ± 3ºC/5,4ºF
+15ºC/59ºF – 40ºC/104ºF = ± 2ºC/3,6ºF
5. Watch operational temperature range:
-10ºC-60ºC / 14ºF–140ºF
147