Diving Mode - Festina IFMCS00 Betriebsanleitung

DIVING MODE

When in any other mode, the watch will enter the diving mode with the display changing
to (Ready display) by pressing button (M) for 2 seconds or more. If (Ready display)
put in this way is allowed to stand for about 60 minutes, the display automatically
returns to the preceding mode. One of the following three displays is shown in the
diving mode.
[Ready display]
• DIV mark flashes.
Display before mode change
DIV
Button (M)
When button (M) is pressed for 2 seconds or
more, the watch returns to the time/calendar
mode.
I F M C S 0 0
[Depth Measurement Readings]
• DIV mark flashes.
• Diving depth is indicated.
DIV
12. 5 12. 5
Button (A)
P PP CA
18 30 18
• Diving time is displayed. While
button (A) is pressed, the maximum
depth and water temperature are
indicated.
118
I F M C S 0 0
DIVING MODE
1. When a depth of 1 m (4 ft) is reached after you begin diving with the watch
displaying (Ready display), the display will automatically change to
(Depth Measurement Readings).
2. When the diving depth becomes less than 1 m (4 ft), the display will
automatically change to (0 m (0 ft) after Depth Measurement).
[0 m Reading after Depth Measurement]
• DIV marks turns on
• A depth of 0,0 m flashes
DIV
0. . 0
Button (A)
P PP CA
5 30
Button (M)
• Diving time is displayed.
While button (A) is pressed, the maximum depth and
minimum temperature reached in this dive are
indicated.
(M)
Time/Calendar Mode
119