Setting The Time And Calendar - Festina IFMCS00 Betriebsanleitung

TIME/CALENDAR MODE

SETTING THE TIME AND CALENDAR

Always perform the Digital setting first, then the Analog setting
Hour, Minute, AM/PM
Button (B) 10:10
Button (A)
P
SEL CA
25. FP
Button (M)
Date, Day or Second
I F M C S 0 0
[DIGITAL SETTING]
[Setting the Time and Calendar]
1. While in the time mode, press button
(B) for two seconds or more, seconds
will flash, and switch to correcting
state.
2. While seconds flash, press button (A)
to reset the seconds to "00" then
seconds start again.
94
I F M C S 0 0
TIME/CALENDAR MODE
SETTING THE TIME AND CALENDAR
3. When in the seconds correcting state (seconds flash), press button (B), the
flashing digits will change in the order of seconds
month date year 12/24 hour system. Select the digit to correct.
4. Correct the flashing digit by pressing button (A).
(Press and hold down button (A) to quick advance the flashing digit).
* Press button (A), the 12 hour/24 hour will switch alternately.
* If the watch is held in any correcting state for 3 minutes or more without
changing the digits, the correcting mode is reset and the watch will
automatically return to normal time display mode.
* Pressing button (M) while in the time correcting state, will return the
watch to normal display mode. (Manual return).
* Due to the autocalendar, no correction at the end of the month is required.
minutes hour
95