Festina IFMCS00 Betriebsanleitung Seite 56

LOG MODE
• Only when log (I) is displayed, the display is automatically changed to log (II) after
2 seconds without pressing button (A).
1. Number of dives: The number of dives performed in a particular day. A maximum
of 9 dives can be counted. Counting is initiated day by day.
2. Dive month and date: Date and month when diving is performed.
3. Maximum depth: The maximum depth that was reached in one diving.
4. Dive time: Total time when the diver remains deeper than the depth of
one meter. If the diver goes again into water deeper than 1 m (4 ft) within 10 minutes
after the diving depth becomes shallower than 1 m (4 ft), the dive time counting
resumes at the time when the measurement is stopped and the accumulative
time is recorded successively.
Measurement is taken in units of seconds and up to 100 minutes at maximum. When
the maximum is reached, the measurement starts again with zero.
5. Dive start time: The time when a dive depth reaches 1 m (4 ft).
I F M C S 0 0
108
I F M C S 0 0
LOG MODE
6. Dive end time: The time when the dive depth becomes shallower than
1 m (4 ft).
7. Average depth: Average depth in one dive.
8. Minimum temperature: The minimum temperature recorded in one dive.
These log data are displayed as log (I), (II), (III) and (IV) separately.
[To delete all log data]
Button (B) -- -- Button (A)
-- --
Depress button (A) and button (B)
together for 2 seconds or more and all
log data will be deleted.
109