Operation - ecofort ecoQ 20L Bedienungsanleitung

OPERATION

Plug the unit into a correct mains socket.
Press ON/OFF button to turn on the unit. The compressor will start to work.
Press humidity setting button to set the working model you need: continuous working, humidity
40%, 50%, 60% or 70%. The relative indicator will light on.
Press speed/ventilation button to set the ventilation speed, high or low. The relative indicator will
light on.
Press the TIMER button to set the operating hour you need (1~24 hours). The display window will
show the hour(s) you set as you press the TIMER button, after releasing it for 8 seconds around, the
display window will return to the room humidity. As the set time has been reached, the compressor
will stop working automatically.
By pressing the "TEMP" button, the display window will show the room temperature, after releasing
the button for 8 seconds around, the display window will return to the room humidity.
DRYER function is turbo ventilation to dry the moisture in the air continuously, so it could help to
dry the laundry.
To turn off the unit, press ON/OFF button again.
Pre-setting function By pressing TIMER button but without turning on the other functions (including
ON/OFF button), you can PRE-SET the time for the machine to work. For example, if you press the
timer to '2', the unit will work automatically after 2 hours.
Please note, the indicator in the front plate will light on in 3 different colors to
reflect the ambient humidity level. By this, the user can understand immediately
what the ambient humidity condition is:
39
Blue light – room humidity > 70%
Green light – room humidity 50 ~ 70%
Red light – room humidity < 50%
Red light flash – water full alarm