Operation - ecofort ecoQ 20L Bedienungsanleitung

Operation

Plug the unit into a correct mains socket.
Press ON/OFF button to turn on the unit. The compressor will start to work.
Press humidity setting button to set the working mode you need: CNT=continuous working, humidity
40%, 50%, 60% or 70%. The relative indicator will light on.
When the set target humidity has been reached, the compressor switches off and the operating
display (11) extinguishes. The fan continues to run for another 10 minutes to further control the
prevailing humidity in the room. If the device does not register any excessive humidity, the fan will
also switch off.
If the humidity in the room rises again above the set target value, the ecoQ 20L automatically
switches on again.
Press speed/ventilation button to set the ventilation speed, high or low. The relative indicator will
light on.
39
The DRYER function is turbo ventilation to dry the moisture in the air continuously, so it could help
to dry the laundry.
To turn off the unit, press ON/OFF button again.
By pressing the "TEMP" button, the display window will show the room temperature, after releasing
the button for 8 seconds around, the display window will return to the room humidity.
Timer
Press the TIMER button to set the operating hour you need (1-24 hours). The display window will
show the hour(s) you set as you press the TIMER button, after releasing it for 8 seconds around, the
display window will return to the room humidity. As the set time has been reached, the compressor
will stop working automatically.
Pre-setting function
By pressing TIMER button but without turning on the other functions (including ON/OFF button), you
can PRE-SET the time for the machine to work. For example, if you press the timer to '2', the unit will
start to work automatically after 2 hours.
Please note, the indicator in the front plate will light on in 3 different colors to reflect the ambient
humidity level. By this, the user can understand immediately what the ambient humidity condition
is:
Blue light – room humidity > 70%
Green light – room humidity 50 - 70%
Red light – room humidity < 50%
Red light flash – water tank full alarm
41