Accessories; Operation - ecofort ecoQ 12L Schnellanleitung

Accessories

Active carbon filter

OPERATION

1. Power indicator
2. ON/OFF (power) button
3. "Full Water" indicator
4. Humidity setting button
5. Working mode indicator (continuous working,
humidity 40%, 50%, 60%, 70%)
6. Timer operation indicator
7. Timer button
Steps:
1. Plug the unit into a correct mains socket. Press ON/OFF button to turn on the unit. The power
indicator will light on and the compressor will start to work.
2. Press humidity setting button to set the working mode you need: continuous working, humidity
40%, 50%, 60% or 70%. The relative indicator will light on.
3. Press the TIMER button to set the operating hour you need. There are 4 hour indicators above
the TIMER button: 1, 2, 4, 8 hours, however, the working hours could be accumulated, so it's not
just 4 different hours you could set. For example, choose 1 and 2 hours at the same time, the unit
will work 3 hours continuously, choose 1, 2 and 4 hours at the same, it will work 7 hours. Thus,
the max. working hours you could set is 15 hours, in case all these 4 indicators lights are on . As
the set time has been reached, the compressor will stop working automatically.
43