Bosch PFZ 600 Bedienungsanleitung Seite 8

Tool Specifications
Power Sabre Saw
Part number
Rated power
Output power
Stroke rate at no load
Electronic control
SDS Tool holder
Orbital action
Stroke length
Cutting capacity (Wood)
Cutting capacity (Steel sheet)
Weight
Safety class
Machine Elements
1 Saw blade*
2 Base plate
3 SDS slider for releasing the saw blade
4 Knob for orbital action
5 Locking button for On/Off switch
6 On/Off switch
7 Knob for stroke rate selection
(PFZ 600 E / 700 PE)
8 Clamping plate (PFZ 600 / 600 E)
9 Stroke rod (PFZ 600 / 600 E)
10 Allen key (PFZ 600 / 600 E)
11 Allen screw (PFZ 600 / 600 E)
*Optional extra
*Not all of the accessories illustrated or described are
included as standard delivery.
Noise/Vibration Information
Measured values
EN 50 144.
Typically the A-weighted noise levels of the product
are: sound pressure level: 86 dB (A); sound power
level: 99 dB (A).
Wear ear protection!
The typical weighted acceleration is 4.5 m/s
Intended Use
The machine is intended for sawing, filing, brushing
and polishing of wood, plastic, metal and building
materials while resting firmly against the workpiece.
It is suitable for straight and curved cuts as well as
for flush cutting. The saw blade recommendations
are to be observed.
8 • 2 609 931 730 • TMS • 06.06.01
PFZ 600
0 603 363 0..
600 W
370 W
2600 spm
–
–
–
28 mm
165 mm
20 mm
3.1 kg
/ II
determined according
2
PFZ 600 E
0 603 363 7..
600 W
370 W
500 – 2600 spm
•
–
–
28 mm
165 mm
20 mm
3.1 kg
/ II
safety instructions in the enclosed booklet must
be followed. Before using for the first time, ask
for a practical demonstration.
Do not drill, fasten or cut into blind areas
to
where electric, gas or water lines may exist.
Use appropriate detectors to determine if
these lines are hidden in the work area or call
the local utility company for assistance.
Contacting electric lines may cause fire or electric
shock. Striking a gas line will probably result in
explosion. Breaking into a water pipe will cause
.
property damage or may cause an electric shock.
Connect machines that are used in the open via
a residual current device (RCD) with an actuating
current of 30 mA maximum. Use only extension
cables that are approved for outdoor use.
Do not work with materials containing asbestos.
Observe the legal regulations and recommenda-
tions by the manufacturer.
Insert the mains plug only when the machine is
switched off.
English - 1
PFZ 700 PE
0 603 362 7..
710 W
440 W
500 – 2600 spm
•
•
• (4 Stages)
28 mm
195 mm
20 mm
3.4 kg
/ II
For Your Safety
Working safely with this machine
is possible only when the operat-
ing and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed. In addition, the general
If the mains cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Wear protective glasses and ear pro-
tection.
Wear protective gloves and sturdy
shoes.