Unloading The Wheelchair; Driving Without Load; Maintenance - Autoadapt Carolift 90 Benutzerhandbuch

4. UNLOADING THE WHEELCHAIR/SCOOTER
Unload the wheelchair/scooter in the same manner as by loading, but in reversed order.
Bear in mind following safety rules:
Make sure no person, animal or object is within the loading area!
Keep the hoist folded down towards the vehicle floor when not in use.
Keep the control pendant in it's holder, when not in use, to avoid that the hoist is
being accidently activated.
Do not lift the lifting device of the cord beyond the yellow distance indicator.

5. DRIVING WITHOUT LOAD

IMPORTANT!
For safety reason, the hoist shall be lowered
towards the floor, when driving without a loaded
wheelchair or scooter. This is for improving the
safety by possible crash or sudden brake.

6. MAINTENANCE

6.1 Check-up
Make sure the control pendant cable is intact and
without damages.
Make sure the lift cord has not been damaged.
6.2 Fuse
The fuse of Carolift is of an automatic type and does
not need to be changed.
1. Run the cord 10 cm outwards by pressing the
control button for lowering. The cord should not
be tense when the hoist arm is being folded to
the floor.
2. Hold on to the hoist arm and press the release
handle, according to picture.
3. Fold down the hoist arm towards the floor.
6.3 The cord
The lift cord shall be changed every fourth year, or
after 4000 lifts.
6.4 Cleaning
Use a vacuum cleaner with narrow nozzle to clean
around the hoist base.
Use a moist towel to clean metal parts and plastic
cover.
9