ratiotec T 200 Kurzbedienungsanleitung Seite 5

7. +1 | +10: ___________
+1: _________________ Increase the bundle quantity +1.
+10: _______________
8. CLEAR: _____________
9. START: _____________
Short keypress: ______
Long keypress: ______
10. RESET: _____________
Operation
Connect the mains cable and switch the machine on. The machine will now run a self-test. After the test is success-
fully completed, the device is ready for use. In the case of an error message, please find an overview of the error
messages in the detailed user guide on our website.
Place the stack of banknotes to be counted in the centre of the banknote feeder. If autostart is activated, the bank-
note counter will start the counting procedure automatically after approx. 2 seconds. If autostart is deactivated, the
counting procedure is initiated by pressing START.
Modify bundle quantity
Increase the bundle quantity +10.
Deactivate bundle function
Start counting process | autostart
Start counting process | restart counting process when counterfeit money is
reported or in case of error message.
Activate/deactivate Autostart (The counting procedure starts approx. 2
seconds after you place the banknotes in the banknote feeder).
Reset the counting result to zero
[ EN]
5