ratiotec RS 1000 Kurzbedienungsanleitung Seite 6

[EN]
Brief Instructions Manual RS 1000 | RS 1200 Money Scale
Count coin rolls (RS 1200)
Using this function you may count coin rolls. In the SETUP Menu, you can choose the option "COIN ROLL". Press < or >
to activate „ON" or deactivate „OFF" this function and then confirm selection with OK. Place coin rolls in any desired
sequence. The RS Money Scale identifies each coin roll automatically. Remove all coin rolls together or press "+" and
then remove coin rolls one by one. Exit coin roll counting mode by pressing " > ".
Count banknotes
Start adding banknotes by putting ca. 15 banknotes per step (do not remove the banknotes that have already been
placed on the scale!).
Error code:
OVERLOAD: Remove the complete weight from the scale and restart the counting process using a smaller amount.
ERROR: A key was pressed during the counting process / More than 1 kg is on scale when turning it on / (RS 1200)
More than one coin roll was removed at once. The scale cannot identify the removed coin rolls.
SUSPECT CHK ROLL (RS 1200): The scale cannot identify the coin roll, it is either incomplete, it has more coins
than it should have or there is a wrong coin inside.
6
You will find a complete instructions manual on: www.ratio-tec.com
Auto-Add / Auto-Continue
The functions Auto-Add and Auto-Continue, activated from factory, allow an automatic run of
the counting process, starting with the lowest denomination of the selected currency (also in
descending order) and adding each counting result to a total sum.
Count coins
1. Fill coin cup with the respective coins.
2. Place cup on Money Scale.
Tip: Your cash-drawer cups will enable a faster counting process!
ca. 15 + ca. 15 + ca. 15 = 45