Led Indications - Viatom BP1 Handbuch

3.2 LED indications

Blue blink
Blue ON
Red blink
Red ON
Blue-Red
blink
3.3 Applying the Arm Cuff
1. Wrap
around the upper
arm, about 1 to 2
cm above
inside
elbow, as shown.
2. Place
directly
the
clothing
cause a faint pulse
and result in a
measurement
error.
3. Constriction of the
upper arm, caused
by rolling up a
shirtsleeve, may prevent accurate readings.
Confirm that the artery position mark is line up
4.
with the artery.
3.4 How to Sit Correctly
To take a measurement, you need to be relaxed and
Powered on and Bluetooth is not
connected
Bluetooth connected
Low Battery
Charging battery
Pumped pressure is too high (above
300mmHg)
the cuff
the
of the
the cuff
against
skin, as
may
Do not roll up shirtsleeve tightly
6
1-2cm
Artery position
mark