Viatom BP1 Handbuch Seite 5

2.4 Symbols
Symbol
CE0197
IP22
SN
3. Using the Monitor
3.1 Charge the Battery
Use the USB cable to charge the monitor. Connect the
USB cable to a USB charger or to the PC. A fully charge
will need 2 hours. When the battery charged fully the
indicator will be OFF.
The monitor works in a very low power consumption
and one charge usually works for months. When the
battery is low the indicator will be red flash.
On-screen battery symbols which indicate the battery
status can be seen on the APP.
Note: The device cannot be used during charging.
Meaning
Type BF-Applied Part
Manufacturer
European authorized representative
CE Marking indicating conformance to EC
directive No. 93/42/EEC concerning medical
devices.
Indicate separate collection for electrical and
electronic equipment (WEEE).
Protected against spraying water and against
access to hazardous parts with a tool, per IEC
60529.
Follow operating instructions
Serial number
5