Viatom BP1 Handbuch Seite 15

Note 1: At 80 MHz to 800 MHz, the separation distance for the higher
frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
Field strengths from fixed transmitters, such as base stations for radio
a
(cellular/cordless) telephones and land mobile radios, amateur radio, AM and
FM radio broadcast and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the device is used exceeds the
applicable RF compliance level above, the device should be observed to verify
normal operation. If abnormal performance is observed, additional measures
may be necessary, such as re-orienting or relocating the device.
Over frequency range 150kHz to 80MHz. For Resp field strength should be
b
less than 1V/m.
Recommended separation distances between portable and mobile RF
communications equipment and the device
The Blood pressure monitor is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The customer
or the user of the Blood pressure monitor can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the monitor as
transmitter manufacturer and d is
the recommended
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey
be less than the compliance level in
each frequency range
Interference may occur in the
vicinity
equipment
following symbol:
15
separation
, should
a
.
b
of
marked with the