Viatom BP1 Handbuch Seite 3

When reusing the device, confirm that the device
l
is clean.
Do not modify the device. It may cause accidents
l
or damage to the device.
To measure blood pressure, the arm must be
l
squeezed by the cuff hard enough to temporarily
stop blood flow through the artery. This may
cause pain, numbness or a temporary red mark to
the arm. This condition will appear especially
when measurement is repeated successively. Any
pain, numbness, or red marks will disappear with
time.
Do not apply the cuff on an arm with another
l
medical electrical equipment attached. The
equipment may not function properly.
People who have a severe circulatory deficit in the
l
arm must consult a doctor before using the device,
to avoid medical problems.
Do not self-diagnose the measurement results
l
and start treatment by yourself. Always consult
your doctor for evaluation of the results and
treatment.
Do not apply the cuff on an arm with an unhealed
l
wound.
Do not apply the cuff on an arm receiving an
l
intravenous drip or blood transfusion. It may
cause injury or accidents.
Do not use the device where flammable gases
l
such as anesthetic gases are present. It may cause
an explosion.
Do not use the device in highly concentrated
l
oxygen environments, such as a high-pressure
oxygen chamber or an oxygen tent. It may cause a
fire or explosion.
3