Aerial Installation; Channel Search - Finlux 26FLHD846 Bedienungsanleitung

Use " " or " " buttons to highlight the menu item
that will be adjusted and then press " " or " " button
to set.
• Audio Language is used for selecting the soundtrack
of a channels. Primary settings are the fi rst priority
when multiple choices are available on a broadcast.
Secondary settings are the alternatives when the
fi rst options are not available.
• Guide Language: If the received EPG data includes
the selected guide language, EPG data language
will be changed accordingly.
•Teletext language sets the desired teletext
language.
• Media Subtitle: In order to display subtitles properly
while viewing a media fi le via Media Browser, use
this setting to select a movie subtitle language.
By pressing " " or " " button, select the desired
language option (optional).
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in most effi cient way.
Select Installation from the main menu by pressing "
" or " " buttons.

Aerial Installation

Select Aerial Installation line and use OK button to
view the menu contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted. The following message appears on the
screen:
Highlight Yes or No by using " " or " " buttons
and press OK button to confi rm. If Yes is selected,
automatic search starts. Selecting No cancels
automatic search. After search is completed for digital
channels, a message asking whether to search for
analogue channels appears on the screen:
Highlight Yes and press OK button to search for
analogue channels. The following menu appears on
the screen for analogue channel search:
Set Language item by pressing " " or " " button.
Press " " or " " button to highlight Country item and
then use " " or " " to set. Press " " or " " button to
highlight TXT Language. Select a region by using " "
or " " button. When fi nished, press OK or RED button
to continue. To cancel, press the BLUE button.
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.

Channel Search

In manual channel search, the number of the multiplex
is entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level and signal quality are shown on the
screen. In both channel and auto search any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.
Frequency Search
Enter the desired frequency. When fi nished, press OK
button, and the TV will start frequency search.
Network Search
When you select Network Search line and press OK
button, the following menu screen will be displayed
on the screen:
English - 58 -