Language Settings - Finlux 26FLHD846 Bedienungsanleitung

If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
(*) Hard of Hearing function will not be available for UK.
Channel List
Use " " or " " buttons to go to Channel List option.
Use or buttons to toggle Channel List Mode. If you
select "TV Only", with the " " or " " buttons, you
navigate through only TV channels. If you select
"Radio Only", with the " " or " " buttons, you
navigate through only radio channels. If you select
"Text Only", with the " " or " " buttons, you navigate
through only text channels. If you choose "Show All"
all channels can be navigated. To save the recent
changes and exit; press the "MENU" button.
Digital Audio Out
Use this setting to defi ne digital audio out signal type.
Use " " or " " buttons to set Digital audio out as
Compressed (AC3) or PCM. If your selected channel
includes compressed sound stream, you should connect
your TV to external equipment by using Spdif out of
your TV for enabling the sound output. If you have no
external sound equipment, please select Digital Audio
Out as "PCM" by using " " or " " button.
A/V Delay
You can use this setting when there is an AV
synchronization problem in the received broadcast.
Press " " or " " button to change the delay.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use " " or
" " buttons to select an item. Then use " " or " "
buttons to set.
Audio Description (Optional)
This function enables or disables the audio description
feature by pressing the " " or " "buttons.
Preferred Language (Optional)
By pressing the " " or " " buttons the preferred audio
description language is being changed. This setting
can be used, only if it is available.
Relative Volume (Optional)
Using this option, the Audio Description volume level
can be increased or decrased relatively, according to
the general volume.
Standby Search (*) (Optional)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use " " or " " button to select Standby Search and
then press " " or " " button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
To use Standby search please make sure that you
select Standby Search as On.
Active Antenna(*)
Use " " or " " buttons to highlight Active Antenna
option. When antenna power option is set as On by
pressing " " or " " button, +5V will be transmitted to
the antenna output.This feature enables the use of
active antenna.
Note: Antenna power should be "Off" when standard
antenna is used instead of the active antenna.
Broadcast Type
When you set the desired broadcast type by using
" " or " " button, the TV will display the related
channel list. If the related source has does not include
any stored channels, "No channels for this type
have been found." message will be displayed on
the screen.

Language Settings

In this menu the user can adjust the preferred language.
Select "Language" item in the Setup menu and press
OK button. Then language settings menu will be
displayed.
.
You can set the desired language options by using "
" /" " and " "/" " buttons.
(*) optional.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Language Settings
English - 57 -
(optional)
(optional)