Klarstein 10030001 Anschluss- Und Anwendungshinweise Seite 14

Substructure
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2. Put the one way valve on the air outlet of cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the cooker hood with enclosed 4 screws.
3. Install the adjusted board on the bottom of the hood in order to keep out the gap between hood back and
cupboard.
Vertical and horizontal indoor ventilation
There are 2 methods for ventilation, including ‚ horizontal ventilation' and ‚ vertical ventilation' . Please pay at-
tention to the ventilation method when installation.
Horizontal Ventilation: please use the cover to seal the outlet on the top, then the air can be vented from back.
Vertical Ventilation: please use the cover to seal the outlet on the back, then the air can be vented from top.
Air ventilation setting
Outdoor air ventilation: Turn the adjuster to outdoor position, install the outlet, turn on the cooker hood, then
the air will be vented from the outside outlet.
Indoor air ventilation: Turn the adjuster to indoor position (pic.5B), install the outlet cover, turn on the cooker
hood, then the air can be vented from the inside outlet.
14