Black Out Alarm; Door Open Alarm; Temperature Alarm - Whirlpool WBA43983 Gebrauchsanweisung

and the day.
The feature remains active until you deactivate it
(or if a blackout occurs, or if the product is
switched off). To deactivate the function, press the
Eco Night button. When the
icon is OFF the function is not active.
Note: appliance energy consumption is declared
with Eco Night function disabled.
ON/STAND BY
This function turns On/Stand-by both the
refrigerator and the freezer compartments. To put
the product in Stand-by, press & hold the
On/Stand-by button for 3 seconds. All the icons
turn off except On/Stand-by icon back light to
indicate that the appliance is in Stand-by. When the
appliance is in Stand-by, the light inside the
refrigerator compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.
To switch the appliance On again, simply press and
hold for 3 seconds the

BLACK OUT ALARM

After a power blackout, your product is designed to
automatically monitor the temperature in the
freezer when electricity is resupplied. If the
temperature in the freezer rises above freezing
level, the Black Out icon lit the
blinks and the acoustical alarm sounds when
electricity is re-supplied. To reset the alarm press
the Reset Alarm button just once.
In case of Black Out Alarm, the following actions
are recommended:
• If the food in the freezer is unfrozen but still
cold, all the food in the freezer should be moved
to the fridge compartment and eaten within the
next 24 hours.
• If the food in the freezer is frozen, this indicates
the food was thawed and then refrozen when
electricity was re-supplied which degrades taste,
quality and nutritional value and also could be
unsafe. It is recommended to not consume the
food but to dispose of the entire content of the
freezer.
The Black Out Alarm is designed to provide
guidance on food quality in the freezer in the event
of electricity black out.
This system does not guarantee food quality or
safety and consumers are advised to use their own
judgment in evaluating food quality in freezer and
refrigerator compartments.

DOOR OPEN ALARM

The Alarm icon lights up blinking and the
Eco Night
On/Stand-By button.
Alarm icon
acoustic alarm sounds. The alarm is activated when
the door is left open for more than 2 minutes. To
disengage the door alarms close the door, or press
once Stop Alarm button to mute the acoustic
alarm.

TEMPERATURE ALARM

The acoustic alarm sounds and all the 5 Freezer
Temperature LEDs blinks. The alarm is activated
when:
• The appliance is connected to the power supply
after prolonged disuse
• The freezer compartment temperature is too
high
• The quantity of foods loaded into the freezer
exceeds that indicated on the rating plate
• The freezer door has been left open for a long
time
• To mute the alarm buzzer press
just once.
• The Alarm Icon is automatically turned-off
as soon as the freezer compartment reaches a
temperature below -10°C and the Freezer
Temperature LEDs stop blinking and shows the
chosen setting.
FAN
The Fan improves temperature distribution inside
the refrigerator compartment, allowing better
preservation of stored food.
By default, the fan is switched on. It is advisable to
keep the fan switched on, so that the "6th Sense
Fresh Control" /"Green Intelligence ProFresh"
function can work properly and also when the
ambient air temperature is above 27 ÷ 28°C or if
you notice drops of water on the glass shelves or in
sever humidity conditions.
Please note that when the fan is switched on it will
not continuously work.
The fan will start/stop working depending on the
temperature and/or humidity level inside the fridge.
It is therefore absolutely normal if the fan does not
move even if the fan is switched on.
Note: Do not obstruct the air intake area with
food items.
To guarantee the right performance at lower
ambient temperature (colder than 18°C) and to
minimize Energy Consumption, turn off the fan.
To turn off the fan press the button of fan.
If the appliance has the Fan it can be equipped with
the antibacterial filter.
The replacement procedure is included in the filter
box.
Remove it from the box placed in the crisper
drawer and insert into the cover of fan.
22
Reset button