Troubleshooting; Safety Instructions; Causes Of Malfunctions And Their Rectification - Heiniger Xpert 2-Speed/A Betriebsanleitung

7

Troubleshooting

7.1

Safety instructions

DANGER!
DANGER OF FATAL ELECTRIC SHOCK!
Fatal electric shocks can result from contact with electrically live
conductors or components!
Switch the equipment off before troubleshooting the problem.
X X
Repairs to electrical devices must only be carried out by the
X X
factory service department or specialists who have been
trained by the manufacturer.
During the warranty period the device must be opened only by personnel
authorised by the manufacturer, otherwise the warranty will be void.
7.2

Causes of malfunctions and their rectification

Malfunction
The upper blade does not
move
across the
full bearing surface.
Top blade does not move. Defective gear wheel.
Shearing pressure adjust-
ment knob is jammed.
Shearing pressure adjust-
ment knob automatically
releases.
Not enough pressure can
be applied to the upper
blade.
Chicken feet fall out.
16
Cause
Retaining spring broken.
Eccentric shaft and/or ball
and swivelling fork are
worn (insufficient lubrica-
tion).
Bearings are heavily
worn.
Eccentric shaft is broken
or bent.
Ball is missing.
Thread dirty or rusty.
Circlip is jammed.
Circlip missing.
Threaded insert is loose.
Retaining spring broken.
Sliding sleeve is missing.
Sliding sleeve is worn.
Swivelling fork is worn.
Chicken feet are worn.
Securing cams on the re-
taining spring are broken.
Instruction Manual / Xpert 2-Speed sheep clipper
Rectification
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.