1.3.2 Animals; 1.3.3 Blades - Heiniger Xpert 2-Speed/A Betriebsanleitung

Never operate this appliance with the air openings blocked or
X X
while on a soft surface, such as a bed or couch, where it is pos-
sible for the air openings to be blocked. Keep the air openings
free of lint, hair, and similar objects.

1.3.2 Animals

CAUTION!
DANGER OF INJURY BY ANIMALS!
The noise of the clipper can trouble animals. A kick, an attack or
the body weight of the animal can lead to injuries.
Just persons being experienced in handling with animals are
X X
allowed to clip the animals.
Before beginning shearing, remove foreign objects from the
X X
coat (wire, wood etc.).
Secure the animal sufficiently and calm it before starting work.
X X
Proceed with caution when working.
X X
Call in a second person if necessary.
X X

1.3.3 Blades

CAUTION!
DANGER FROM MOVING COMPONENTS!
The moving clipping blade and its sharp edges can cause injuries.
Proceed with caution when working.
X X
Avoid any contact with the moving clipping blades.
X X
Do not touch the area around the clipping blades whilst the ma-
X X
chine is still plugged in to a power source, even if it is switched
off. Before working on the clipping blade/clipping head, always
disconnect the electrical power first.
Do not use damaged shearing blades with blunt or missing
X X
teeth. Only work with sharp shearing blades sharpened by a
specialist workshop.
The upper blade of the shearing head is only held by the ta-
X X
pered pins of the chicken feet. If the shear-pressure adjustment
head is released too much, the upper blade can fly off and
result in injuries.
Instruction Manual / Xpert 2-Speed sheep clipper
5