Select Mode - Braun VitalScan 5 Gebrauchsanweisung

corresponding user's blood pressure data will not be deleted.
The delete operation must be confirmed by user.

Select mode

How to select user1/user2
• Make sure the product is in power off mode.
• Press the "user" button, and the current user mode will flash
on the LCD display.
• Press the "user" button again, it will change to another user
mode.
• When you have set the correct user mode, press the "power"
button to save the user mode and exit this setting.
• If you have selected the correct user mode and do not press
a button for 2 minutes, the product will shut off and save the
user mode you have selected automatically.
How to set date and time
• First turn off the product. Press the "set" button, and the
"month" will flash.
• Press the "adjust" button to change the current month.
(It can only be increased.)
• When the month is correct, press the "set" button again.
• Next the "date" will flash.
• Follow the same operation process to adjust the "date",
"hour" and "minute".
• When you finish the date/time setting, you can press the
"power" button to shut off the product or if you do not press
a button for 2 minutes, the product will shut off and save the
user mode you have selected automatically.
How to set positioning system on/off
Should you wish to deactivate the positioning system proceed
as follows:
• First turn off the product.
• Press the "user" button and hold it for 5 seconds.
• If the "position system" is turned on, the LCD will display "on". If
the "position system" is turned off, the LCD will display "off".
• Press the "user" button again, the state of "position system" will
be changed.
• When the "position system" has been set to your liking, you can
10
press "power" button to shut off the product and the "position
system" state will be saved.
The WHO/ESH indicator to evaluate
blood pressure data
This device has a blood pressure level indicator (M) established
according to WHO and the European Hypertension Society
Guidelines (ESH) in 2007. For every measurement displayed on
the screen, the cursor will indicate the blood pressure level with
the corresponding color code, from green to red. You can use
this classification daily to guide you to understand your blood
pressure level. If you are really concerned by the classification
level, you should consult your doctor.
Irregular heart beat detector
The appearance of this symbol
RED >
irregularity was detected during the measurement. Talking,
moving, shaking or an irregular pulse during the measurement
can result in the appearance of this icon. Usually this is not a
cause for concern, however if the symbol appears often, we
recommend you seek medical advice. The device does not
replace a cardiac examination, but service to detect pulse
GREEN >
irregularities at an early stage.
Calibration
This product has been calibrated at the time of manufacture. If
used according to the Instructions of use, periodic recalibration
is not required. If at any time, you question the measuring
accuracy, please contact an authorized Service Centre
(see package insert for a local Service Centre).
Manufacturing date is given by the LOT number on the back
of the product. The three numbers after LOT represents the
day of the year of manufacture. The two last digits of the year
of manufacture. An example: LOT 25010KYD – this product has
been manufactured on the 250th day of the year 2010.
signifies that a certain pulse
11