Hartan RS one S Bedienungsanleitung Seite 16

Instructions for use
Unfolding the pram
By pushing the lock buttons 5, unfold the handle and bring its two sections
in line. Pull handle 1 upwards until chassis-base catch 2 has engaged.
WARNING! Before using the product, make sure all catches are locked.
Folding the pram
Important! Swing the handlebar 1 that the red securing buttons 4 are
visible from above. Turn the safety lock 3 inwards to unlock the chassis-base
catch 2 and push down the handlebar.
Push the lock buttons 5 and fold the handle's upper section 1 down toward the
bottom.
WARNING! There is always a chance of jamming one's limbs, fingers, etc.
when folding or unfolding the chassis, swinging the handle, or adjusting the
backrest, so we ask you to proceed with caution.
Swinging the handlebar
Push the red securing button 4 and pull the safety turn lock 3 upwards
to unlock the handlebar. After you have put the handlebar into the desired
position, make sure the handlebar locks on both sides are latched.
Height adjustment of handlebar
Press the two handle-folding lock buttons 5 to bring the upper section
of the handlebar 1 in the desired position.
Changing of wheels
Release the parking brake 7. Push the button 6 to release the retention, and
pull off the wheel. Push the wheel right to the axle's stop while pressing down
the button. Make sure, all wheels are held in place properly.
Parking brake
To lock the wheels, depress the red securing button on the brake lever 7 and
swing the lever down. The two toothed brake-crown wheels engage, which is
indicated by a click sound. To release the brake, swing the lever up until it
snaps into place. Having parked the pram, try to push it to check the brake.
WARNING! Make sure the brake is always closed when placing the baby
in the carriage or taking it out of it.
Hood and safety bar
By pressing the bayonet joint 12, the hood or the safety bar can be pulled
out. When inserting it, make sure the safety bar locks into place correctly
and be careful not to pinch any of the fabric parts. By pressing the buttons 11,
the safety bar position can be changed. WARNING! The hood bar 9 of the
stroller and the safety bar are not suitable for carrying the pram.
12