Maintenance - BaByliss i pro 230 ionic Bedienungsanleitung

Temperature
130°C
Fine, bleached
green LED
and/or damaged
155°C
yellow LED
155°C
yellow LED
coloured and/or
180°C
orange LED
180°C
orange LED
205°C
Thick and/or
red LED very curly hair
230°C
red LED
• The red flashing indicator light:
after a very brief heat-up time,
your straighteners are ready to
use; the red LED stays on, the
green LED indicates the ionic
function of your straighteners.
• Take a section of hair about 2 to
3 cm wide and place it between
the 2 heating plates close to the
roots.
• Press the handles
straightener, grip the straightener
tightly to hold the section and
slide it slowly from the roots to
the ends. Repeat if necessary,
then release the handles.
• Take a new section and repeat
until you have straightened all of
your hair.
Note! Every time you use the
straightener, there might be a
little smoke. This could result from
evaporating sebum or the remnants
of hair products (leave-in hair care,
spray, etc.) or damp hair.
• Give your hair the final touch.
Set the style with a light mist of
hairspray or a small amount of
mousse, but do not brush your
hair.
Hair type
• After use, press the '
and unplug the straightener.
To shape your hair
hair
The BaByliss i pro 230 ionic
straightener can also be used to
Normal,
accent certain sections of hair (to
straighten the fringe or create a
wavy hair
tousled look, etc.)
• To style your hair with the
ends curling under, follow the
above instructions but turn the
appliance inwards (as you would
with a brush when blow-drying).
Hold in place for a few seconds,
then release.
• To have the ends curl out, use the
same movement but turn the
straightener outward.

MAINTENANCE

• Unplug the straightening iron
and allow to cool completely.
• Clean the plates using a soft,
dampened cloth, without soap,
to preserve the optimal quality
of the plates. Do not scratch the
plates.
of the
• To protect the plates, store the
straightening iron with the plates
closed tightly.
5
' button