Avaya FC1 Benutzerhandbuch Seite 73

Messsaging on Integral Enterprise • Integral 33/55
Sending a Message
Send a defined text (fixed text) with postdialled digits
Press the star key (long) and then the right softkey. The following
Ü
appears in the display: Mail-Adresse.
or
Press the right softkey for a long period. The following appears in the
display: Mail-Adresse.
then
2
1 3
A B C
D E F
Press the star button. 1234* appears in the display.
Ü
Enter the number of the defined (fixed) text, e.g. 78.
7 8
P Q R S T U V
1234*78 appears in the display.
Press the star button. The defined text appears in the display, e. g.
Ü
1234*Meeting in Room.
(You can use the left softkey
and to enter the number for a different fixed text.)
Press the star button.
Ü
1
0 9
W X Y Z
appears the defined text followed by the postdialled figures, e. g.:
1234*Meeting in Room 109.
Press the hash (#) key. Message sent appears briefly in the display.
#
Verification
POS Meeting ... appears soon after successful transmission of the
message.
NEG Meeting ... appears in the display shortly afterwards if the
subscriber confirms negatively or is not reachable.
If the subscriber is not identifiable, or has not reacted at all to a message
requiring a manual confirmation, ??? Meeting ... appears in the
display shortly afterwards.
Enter the number, e. g. 1234.
4
G H I
to make corrections, where necessary,
and dial digits where required, e. g. 109. In the display
GB
73