Commissioning - Avaya FC1 Benutzerhandbuch

Integral Enterprise • Integral 33/55 • Integral 3/5

Commissioning

If your handset is not yet assembled completely
If the handset is not completely assembled when you receive it, you must
• Insert the MEM-Card (see page 53),
• Install the rechargeable battery pack (see page 53) and
• Remove the protective film from the display, if necessary.
• Finally your service team must register the handset with your telephone
GB
system.
Your handset is then ready for operation.
• Now connect the charger (see page 53/54).
If your handset is already fully assembled
If the handset is already completely assembled and registered with your
telephone system when you receive it, you only need to connect the
charger (see page 53/54).
MEM-Card
You can only use your handset to make and receive telephone calls if a
MEM-Card is inserted. It performs the memory function for your important
handset data, as well as your personal settings and your telephone book.
If you switch handsets you can remove the MEM-card from the ancient
one and insert it into the new one. Thus, you can use the MEM-Card
together with the new handset to make and receive telephone calls
immediately.
When removing the MEM-card, do not use copped or sharp-edged tools.
They might damage the MEM-card.
Attention!
Read and follow the safety instructions about the handling of
explosion-proof units from page 78 to 81.
52 V 1.4b • 03/2007