High Power Operation - Toshiba MMK-AP0073H Betriebsanleitung

SMMS High-Wall Type

High power operation

High power (Hi POWER)
• The Hi POWER (high power operation) mode
automatically controls room temperature, airflow
and operation mode so that the room is quickly
cooled in summer and warmed in winter.
PRESET
TEMP
QUIET
SWING FIX Hi-POWER
Setting Hi POWER mode
1
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the "Hi POWER" mark
on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi POWER button
Press the Hi POWER button once again.
At the same time, the "Hi POWER" mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in
the DRY and FAN ONLY operation and
when the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
FAN
MODE
COMFORT
SLEEP
1
– 14 –
Quiet operation
• The QUIET mode provides quiet operating
status by automatically setting the fan speed to
the lowest speed.
PRESET
TEMP
QUIET
SWING FIX Hi-POWER
Setting QUIET mode
1
QUIET button
Press the QUIET button after starting any operation.
At the same time, the
Cancelling QUIET mode
1
QUIET button
Press the QUIET button once again.
At the same time, the
controller disappears.
CAUTION
The QUIET mode cannot be activated in the
DRY operation.
NOTE
Under certain conditions, the quiet operation may
not provide adequate cooling or heating due to the
feature of quietness.
Owner's Manual
FAN
MODE
COMFORT
SLEEP
1
mark is indicated.
mark on the remote
EN
14-EN