Toshiba MMK-AP0073H Betriebsanleitung Seite 23

SMMS High-Wall Type
3. Wipe out water from the air inlet grille and dry it.
4. Fit the left and right arms of the air inlet grille to the
shafts on the two sides of the air conditioner and push
in completely, and then push in the centre arm.
5. Check that the centre arm has been completely
inserted and close the air inlet grille.
• Push the arrow locations (four) at the bottom of the
air inlet grille to check whether the grille is
completely closed.
– 22 –
Owner's Manual
EN
22-EN