Cleaning And Care - Klarstein 10028924 Bedienungsanleitung

Important Notes on Use
• Do not stop and start the machine during the freezing process, as the mixture may freeze in contact with the
bowl and prevent movement of the paddle.
• To avoid overheating the motor, the direction of rotation will change if the mixture becomes too thick. If the
direction of rotation continues to change, stop the machine when the mixture is ready.
• In the unlikely event of the motor overheating, a safety cut out will operate causing the motor to stop. If this
happens, unplug the machine and allow the power unit to cool.
• For the best result of ice cream, the paddle will contact with the inside of the inner bowl when the paddle
moves.
• When the setting time is over, the machine is stopped automatically, unplug the machine and remove the
power unit/lid. The ice cream is ready to serve.
• The ice cream produced should be a soft spoonable type. This can be transferred to a separate container for
storage in the freezer or if you wish to firm the ice cream before eating.
• Do not use metal utensils to remove mix from the bowl.
Important Notes on Use of the Inner Bowl
• Do not remove the inner bowl from the freezer until ready to make ice cream..
• We suggest that you keep the inner bowl in the freezer so that it is ready for use. Place in a plastic bag before
freezing. Freeze the inner bowl in the upright position.
• Always make sure the inner bowl is thoroughly dry before placing in the freezer.
• Do not puncture or heat the inner bowl.
• The inner bowl should be placed in a freezer that is operating at a temperature of -18 °C or below for 8 hours
before use.
• For best results always refrigerate the ingredients before making ice cream.
• The addition of alcohol to recipes inhibits the freezing process.
Important Hints on Cleaning
• Always switch off, unplug and dismantle before cleaning.
• Never put the power unit in water or let the cord or plug get wet.
• Do not wash parts in the dishwasher.
• Do not clean with scouring powders, steel wool pads, or other abrasive materials.
Inner Bowl
Allow the inner bowl to reach room temperature before attempting to clean. Take out the inner bowl and wash
the inside of the bowl, then dry thoroughly. Do not immerse in water.
Outer Bowl
Wash then dry thoroughly.
11

Cleaning and Care